Unitech HT580 Spécifications télécharger pdf (Page 11)

HT580 User Reference Guide Unitech Electronic CO. LTD

Chapter 2: Operating the HT580

After powering on the HT580, you will see the Main Menu as below:

2.1 Setting System

Press [1] or [MENU] to enter “SETTING” category. There you will see the following four options:

1. DATE & TIME, 2. DEVICE, 3. MODEM INIT, 4. SUPERVISOR

2.1.1 DATE & TIME:

Press [1] or [MENU] to enter the DATE & TIME category to set the correct date and time. The

page will appear as it is shown below:

Press numeric keys to input correct date and time. Once complete, press [ENTER] to save the

revised settings. To return to the previous menu, press [ESC].

2.1.2 DEVICE

When you select device setting, you will be able to see three settings as shown below:

2.1.2- 1 < BACKLIGHT >

Press [1] or [scan] to enter <BACKLIGHT> mode and to press [ESC] to go back to the device

setting mode.

< BACKLIGHT > selection: press [MENU] to scroll down on your preferred mode of backlight

duration as ON 10 SECS / ON 20 SECS / ON 30 SECS / ON 60 SECS / Always OFF. Once you

select the preference for backlight duration, press [ENTER] to complete the setting.

Note: Selecting “ON 10 SECS“ means that backlight remains active for 10 seconds. The default

may be reset if you press any key while the backlight is active.

YYYY-MM-DD

2000-01-08

HH-MM-SS

05:50:35

1. BACKLIGHT

2. SCANNER

3. AUTORUN

HT580 V1.06

1. SETTING

2. FORMCACHING

3. RUN APG580

1 2 ... 6 7 8 9 10 11 12

Pas de commentaire

Unitech HT580 Spécifications Page 11