Unitech PA982 Manuel d'utilisateur télécharger pdf (Page 25)

Chapter 3 Getting Connected

3. If there are networks already detected, double-tap

the network name to open the Wireless Properties

dialog.

4. Type the SSID in the Network Name text box.

An SSID (Service Set IDentifier) is the name

assigned to a wireless (Wi-Fi) network. All devices

must use the same case-sensitive name to commu-

nicate. The name is a text string up to 32 bytes long.

5. Configure the remaining Wireless Properties, and

tap OK.

6. Tap and hold the network name, then tap Connect.

7. When finished, tap OK.

For more information on how to configure the wireless net-

work settings, tap Start ¨ Help.

Using the WiFi Tool

The WiFi tool enables you to get, renew, and release IP

addresses, monitor the WiFi signal strength, and enable RF power saving mode.

1. Tap Start → Programs → Communications → WiFiTool.

The WiFiTool screen appears.

The following tools are available in the utility.

• IP Tab: enables you to assign an IP address to the PA982,

renew an IP address, or release the PA982’s IP address.

• Signal Tab: displays the wireless card’s signal strength, and

enables you to enable logging at specified intervals.

• RF Power Tab: enables you to set the wireless card’s

power saving mode:

– Continuous Access Mode (CAM)

– Fast_PSP Mode

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 33 34

Pas de commentaire

Unitech PA982 Manuel d'utilisateur Page 25