Unitech PA982 Manuel d'utilisateur télécharger pdf (Page 15)

Chapter 1 Getting Started

Connecting the PA982 to a PC

Use the synchronization power cable to connect the PA982 to a PC to use with ActiveSync.

1. Connect the RS232 connector jack to the PA982 (1).

2. Plug the RS232 serial connector into a serial port on the PC and connect the AC adapter into

the RS232 connector (2).

3. Connect the AC adapter into an electrical outlet (3).

Turning the PA982 on for the First Time

After you have initially charged your device for about 16 hours, the device is ready to be used. You can

now start up your device where you’ll adjust the screen brightness, calibrate the display, and set up the

system time zone, date and time.

Powering On

1. Turn on your device by pressing the power button

on the front panel.

NOTE: The PA982 screen ships with a protective

plastic film. You may remove this if desired

by peeling from one corner. The screen will

be more susceptible to scratching without

the film, but will be more readable.

2. The unitech PA982 welcome screen appears for a

moment followed by the calibration screen.

Power Button

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 33 34

Pas de commentaire

Unitech PA982 Manuel d'utilisateur Page 15