Unitech MS335 Manuel d'utilisateur télécharger pdf (Page 26)

Scanner Configuration Manager

Bar Code Symbologies, continued

UPC-A

Send Check Digit toggles whether or not to send a check digit.

Default is “Send”.

•

Send Leading Digit toggles sending or not sending a leading

(“start bar code”) digit. Default is “Send”.

•

Code ID is a user-definable identification letter for UPC-A, which

is referred to in the “Use Code ID” function (see page 9).

Default is letter “A”.

•

Enabled toggles the ability for the keyboard/scanner to read

UPC-A on or off. Default is “Yes”.

•

Codabar

Maximum Length defines the maximum length the user will

accept for a valid bar code. Default is “48”.

•

Minimum Length defines the minimum length the user will

accept for a valid bar code. Default is “3”.

•

CLSI Format deletes the start and stop sentinels and outputs the

data with spaces inserted after the 1st, 5th, and 10th characters.

Default is “No”.

•

Check Digit defines whether or not a check digit (to insure data

accuracy) is calculated, and if so, whether it should be sent or

not. Default is “Not Calculate”.

•

Send Start/Stop toggles sending or not sending start/stop

sentinels. Default is “No Send”.

•

Code ID is a user-definable identification letter for Codabar,

which is referred to in the “Use Code ID” function (see page 9).

Default is letter “N”.

•

Enabled toggles the ability for the keyboard/scanner to read

Codabar on or off. Default is “No”.

•

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 40 41

Pas de commentaire

Unitech MS335 Manuel d'utilisateur Page 26