Unitech MT380 Manuel d'utilisateur télécharger pdf (Page 34)

Performing a Cold Start

A cold start will erase all data and all programs you have added and will restore the device to the

default factory settings. However, data and application programs stored in the Flash Storage will not be

deleted.

Never perform a cold start unless a warm start does not correct your problem. When you perform your

next ActiveSync operation, you can restore any data that you previously synchronized to your computer

or you can restore data that you backed up to a storage card.

You can perform a cold start using the BootMode utility in the operating system, or by pressing the Cold

Boot hardware reset button in the unit.

You would perform a cold start in any of the following situations.

• Reset the operating system

• Restore the terminal back to factory defaults

• Reset the terminal after a boot loader, keyboard and kernel upgrade.

CAUTION! A cold start erases all data and installed applications in RAM memory.

Method 1: From WinCE

1. Tap → Programs → Utilities → Boot-

Mode.

2. Tap Cold Boot.

Method 2: From Hardware

1. Locate the cold start button on

rear MT380.

2. Lightly press the tip of stylus to the

cold start button.

Cold Start

Button

1 2 ... 29 30 31 32 33 34 35 36

Pas de commentaire

Unitech MT380 Manuel d'utilisateur Page 34