Unitech MS840 Manuel d'utilisateur télécharger pdf (Page 21)

Step 4: Place the iron plate against the wall, and mark

the 2 screw hole locations with a pen or pencil. Drill

the screw locations somewhat deep. Insert 2 plastic

conical anchors into the screw holes. Attach and

secure the plate to the wall with the 2 screws.

Step 5: Align the two holes on the bottom surface of the cradle respectively with the

two short pillars of the iron plate for insertion of the pillars into the holes.

Then, push the cradle downwards to wedge the pillars into the guidance

groove.

Step 6: The cradle wall-mount installation is completed, as shown in the figure

below.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 59 60

Pas de commentaire

Unitech MS840 Manuel d'utilisateur Page 21