Unitech MS860G Spécifications télécharger pdf (Page 78)

74 MS860G WiFi Manual

TROUBLESHOOTING

Problems and Solutions, continued

Step 5: Close VCOM and test the MS860G’s network

connection as follows:

Open a DOS session (Start / Run / type

“cmd”). Type “ping ##.##.##.##” (replacing #

symbols with your MS860G’s actual IP

address).The results should be similar to that

below:

If no packets are found, try a few more times.

If the ping “times out” consistently, then the

MS860G is not connected to the network and

you need to start your setup over. If 1 to 3

packets are received, then you are too far

from the Access Point and have a weak

connection. Steps to resolve this include:

• Get closer to the Access Point.

• If the AP has an antenna, get it as high in

the air as possible.

• Disable the AP’s Power Saving option (if it

has one). Set the AP for maximum power

usage (if possible).

• Set the MS860G’s Power Saving mode to

“off”.

• Concrete walls, large metal objects, etc.

can impede the WiFi signal and should be

ac-counted for and avoided.

1 2 ... 73 74 75 76 77 78 79 80 81

Commentaires sur ces manuels

Pas de commentaire