Unitech MS840B Manuel d'utilisateur télécharger pdf (Page 22)

Step 3: Push up and shift out the wedge and then inversely insert the wedge. Note

that the protruding portion is upward.

Step 4: Place the iron plate against the wall, and mark

the 2 screw hole locations with a pen or pencil. Drill

secure

the screw locations somewhat deep. Insert 2 plastic

conical anchors into the screw holes. Attach and

the plate to the wall with the 2 screws.

Step 5: Align the two holes on the bottom surface of the cradle respectively with the

two short pillars of the iron plate for in

Then, push the cradle downwards to

groove.

sertion of the pillars into the holes.

wedge the pillars into the guidance

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 62 63

Pas de commentaire

Unitech MS840B Manuel d'utilisateur Page 22