Unitech MS916 Manuel d'utilisateur

© 2015 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd. Wireless(BT) Pocket Lase

- 3 - 1.2 Scanner Detail Hand Strap Hole Reset Key Micro USB Connector For scanner charging and data transmission Scan Window Scan &

- 4 - 1.3 Getting Started To turn on the scanner, press and hold the Scan & Power Button for about 2 seconds. To turn off the scanner, press and

- 5 - 1.4 Battery Charging Insert the Micro USB connector into the port on the scanner and the standard USB connector of the USB cable into a US

- 6 - 1.5 Specifications System Display 1" OLED, 128 x 64 OS Proprietary, Connect to host with Windows, Android and iOS Memory 64 Kbytes SRAM

- 7 - Functionality Symbologies 1D Code 39, Full ASCII Code 39, Interleave 2 of 5, UPC A/E/E1, MSI, Codabar, Code 11, EAN8/13, Code 93, Code 128, E

- 8 - Communication Radio Frequency Bluetooth V2.1+EDR. Class 2 Protocol Wireless SPP & HID profiles Range Up to 30 Feet (Open space) Interfac

- 9 - 1.6 LED Indicator/Beeper sequence Division Action/Status LED for Barcode reading & Communication LED for Battery status Beep / Sound Powe

- 10 - Chapter 2 Chapter 2: Display Menu Tree To enter main menu of MS916, press and hold Page Down button and then press Page Up button. You will

- 11 - Top Menu Sub Menu Level 1 Sub Menu Level 2 Options/Result Default Setting1. Buffer Data 1.1. Erase Previous Buffer Entry? Yes/No No 2. Da

- 12 - Top Menu Sub Menu Level 1 Sub Menu Level 2 Options/Result Default Setting1. Beeper Volume High/Medium/Low/Mute Medium 2.Vibrator Enab

i Regulatory Compliance Statements FCC Warning Statement This equipment has been tested and found to comply with the limits for a Class B digital

- 13 - Chapter 3 Chapter 3: Installation 3.1 BT HID BT HID* Establishing BT connection in BT HID mode. 1. Use MS916 to scan BT HID barcode. 2

- 14 - 6. Back to your PC toolbar, right click on the Bluetooth Device icon , choose Open Settings. Go to COM Port page and select in-coming COM port

- 15 - 3.4 USB SPP USB SPP Establishing BT connection in USB SPP mode. 1. To establish bluetooth connection between MS916 and your PC in USB SPP m

- 16 - Chapter 4 Chapter 4: Command settings 4.1 System setting 4.1.1 Default By scan below bar code can restore the factory setting Factory Defa

- 17 - 4.1.4 Power Saving By scan below bar code to setting the time frame for power saving 5 Seconds 20 Seconds 10 Seconds 30 Seconds 15 Seco

- 18 - 4.2.3 Remove the pair You can scan below bar code to remove BT pair Remove Pair

- 19 - 4.3 Output data transmit 4.3.1 Auto mode In this mode, When scanner is out off BT transmit range, the scanned data will be stored in the memo

- 20 - 4.3.3 Batch mode In this mode, the scanned data will be stored in the memory all the time and transmit data only when BT is conncted by scan

- 21 - 4.4 BT Config 4.4.1 HID keyboard block delay In BT HID mode, by scan below time frame to set the block delay time. Default is 10ms. 10 ms *

- 22 - 4.4.2 HID keyboard inter-character delay In BT HID mode, by scan below time frame to set inter-character delay time. Default is 1ms. 1 ms * 5

iiFCC Label Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: 1. This device may

- 23 - 4.4.4 HID keyboard language In BT HID mode, by scan below bar code to change keyboard language. Default is US English US English * UK English

- 24 - 4.5 Beep & Vibration 4.5.1 Beep By scan below bar code to adjust beep volume. Default: Medium volume 4.5.1.1 High volume High Volume

- 25 - 4.5.2 Vibration The vibration is off in default. By scan below bar code to open vibration function Enable Vibrator Disable Vibrator *

- 26 - 4.6 Scan mode Choose one of the options below to trigger the scan engine. Bar codes are on the following page. 4.6.1 Trigger A trigger pull

- 27 - 4.6.4 Flash This trigger mode is used for trigger less operation. Scanning range is reduced in this mode. This mode cannot be used with engine

- 28 - 4.7 Laser on time This parameter sets the maximum time decode processing continues during a scan attempt. It is programmable in 0.1 second in

- 29 - 4.9 Time out between same symbol When in Continuous triggering mode, this parameter sets the minimum time that must elapse before the scan en

- 30 - 4.11 Data Terminator By scan below bar code to terminate data None CR* CRLF LF TAB

- 31 - 4.12 Prefix / Suffix 4.12.1 Prefix/Suffix Values A prefix and/or one or two suffixes can be appended to scan data for use in data editing. To

- 32 - Table 4-1 Character Equivalents Scan Value Keystroke 1000 CTRL 2 1001 CTRL A 1002 CTRL B 1003 CTRL C 1004 CTRL D 1005 CTRL E

iTaiwanNCC Warning Statement 低功率電波輻射性電機管理辦法 第十二條： 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。 第十四條： 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象

- 33 - Scan Value Keystroke 1066 B 1067 C 1068 D 1069 E 1070 F 1071 G 1072 H 1073 I 1074 J 1075 K 1076 L 1077 M

- 34 - 4.12.2 Scan data transmission format To change the Scan Data Transmission Format, scan one of the eight bar codes corresponding to the desired

- 35 - Chapter 5 Chapter 5: Symbology 5.1 Disable All Symbologies Scan the bar code below to disable the decoding of all symbologies. Use this to s

- 36 - 5.2.2 UPC-E To enable or disable UPC-E, scan the appropriate bar code below. 5.2.3 UPC-E1 To enable or disable UPC-E1, scan the appropri

- 37 - 5.2.5 EAN-13 To enable or disable EAN-13, scan the appropriate bar code below. 5.2.6 Bookland EAN To enable or disable EAN Bookland,

- 38 - 5.2.7 Bookland ISBN If you enabled Bookland EAN using Enable/Disable Bookland EAN, select one of the following formats for Bookland data: • B

- 39 - • If you select Autodiscriminate UPC/EAN Supplementals, the scanner decodes UPC/EAN symbols with supplemental characters immediately. If the

- 40 - • Smart Supplemental Plus User-Programmable 1 and 2 - applies to EAN-13 bar codes starting with any prefix listed previously or one of the tw

- 41 - 5.2.8.5 Enable 978/979 Supplemental Mode 5.2.8.6 Enable 977 Supplemental Mode 5.2.8.7 Enable 414/419/434/439 Supplemental Mode 5.2.8.

- 42 - 5.2.8.11 Supplemental User-Programmable Type 1 and 2 5.2.8.12 Smart Supplemental Plus User-Programmable 1 5.2.8.13 Smart Supplemental Pl

iiLaser Information The Unitech MS916 series is certified in the U.S. to conform to the requirements of DHHS/CDRH 21CFR Subchapter J and to the req

- 43 - 5.2.10 Decode UPC/EAN Supplemental Redundancy With Autodiscriminate UPC/EAN Supplementals selected, this option adjusts the number of times a

- 44 - 5.2.12 Transmit UPC-E Check Digit Scan the appropriate bar code below to transmit the symbol with or without the UPC-E check digit. 5.2.1

- 45 - 5.2.14 UPC-A Preamble Preamble characters (Country Code and System Character) can be transmitted as part of a UPC-A symbol. Select one of the

- 46 -

- 47 - 5.2.16 UPC-E1 Preamble Preamble characters (Country Code and System Character) can be transmitted as part of a UPC-E1 symbol. Select one of th

- 48 - 5.2.18 Convert UPC-E1 to UPC-A Enable this parameter to convert UPC-E1 (zero suppressed) decoded data to UPC-A format before transmission.

- 49 - 5.2.20 UCC Coupon Extended Code The UCC Coupon Extended Code is an additional bar code adjacent to a UCC Coupon Code. To enable or disable UCC

- 50 - GS1-128 (formerly UCC/EAN-128) GS1-128 is a convention for printing data fields with standard Code 128 bar code symbols. GS1-128 symbols

- 51 - ABCDE cannot be read Enable Disable Read only symbols without leading FNC 1. Examples: FNC1ABCDFNC1E cannot be read AFNC1BCDFNC1E cann

- 52 - 5.4.2 Trioptic Code 39 Trioptic Code 39 is a variant of Code 39 used in marking computer tape cartridges. Trioptic Code 39 symbols always c

iiiTable of Contents Chapter 1: Overview ...1 1.1 Package ...

- 53 - 5.4.4 Code 32 Prefix Enable this parameter to add the prefix character “A” to all Code 32 bar codes. Convert Code 39 to Code 32 must be ena

- 54 - Two Discrete Lengths - This option limits decodes to only those Code 39 symbols containing either of two selected lengths. Lengths are selec

- 55 - 39 symbols to verify that the data complies with specified check digit algorithm. Only those Code 39 symbols which include a modulo 43 check d

- 56 - NOTE Trioptic Code 39 and Code 39 Full ASCII cannot be enabled simultaneously. If you get an error beep when enabling Code 39 Full ASCII,

- 57 - Table 5-2 Character Equivalents Scan Value Full ASCII Code 39 Encode Char. 1000 %U 1001 $A 1002 $B 1003 $C 1004 $D 1005 $E 1

- 58 - Scan Value Full ASCII Code 39 Encode Char. 1064 %V 1065 A 1066 B 1067 C 1068 D 1069 E 1070 F 1071 G 1072 H 1073 I

- 59 - 5.5 Code 93 5.5.1 Code 93 To enable or disable Code 93, scan the appropriate bar code below. 5.5.2 Set Lengths for Code 93 The length o

- 60 - containing 2 or 14 characters. Numeric bar codes begin on Appendix B. To change the selection or cancel an incorrect entry, scan Cancel on App

- 61 - 5.6 Code 11 5.6.1 Code 11 To enable or disable Code 11, scan the appropriate bar code below. 5.6.2 Set Lengths for Code 11 The length o

- 62 - • Two Discrete Lengths - Select this option to decode only Code 11 symbols containing either of two selected lengths. Select lengths using t

iv5.6 Code 11...61 5.7 Interleaved 2 of 5...

- 63 - 5.6.3 Code 11 Check Digit Verification This feature allows the scan engine to check the integrity of all Code 11 symbols to verify that the da

- 64 - 5.7 Interleaved 2 of 5 5.7.1 Interleaved 2 of 5 To enable or disable Interleaved 2 of 5, scan the appropriate bar code below. 5.7.2 Set

- 65 - Two Discrete Lengths - Select this option to decode only those codes containing two selected lengths. For example, select I 2 of 5 Two Discret

- 66 - 5.7.4 Transmit I 2 of 5 Check Digit Scan this symbol to transmit the check digit with the data. Scan this symbol to transmit data w

- 67 - 5.8 Discrete 2 of 5 5.8.1 Discrete 2 of 5 To enable or disable Discrete 2 of 5, scan the appropriate bar code below. 5.8.2 Set Len

- 68 - Two Discrete Lengths - Select this option to decode only those codes containing two selected lengths. For example, select D 2 of 5 Two Disc

- 69 - 5.9 Chinese 2 of 5 5.9.1 Chinese 2 of 5 To enable or disable Chinese 2 of 5, scan the appropriate bar code below. 5.10 Codabar 5.10.1

- 70 - specific range. To set lengths via serial commands, see Setting Code Lengths Via Serial Commands. One Discrete Length - Select this option to

- 71 - Any Length - Scan this option to decode Codabar symbols containing any number of characters. 5.10.3 CLSI Editing When enabled, this param

- 72 -

- 1 - Chapter 1 Chapter 1: Overview 1.1 Package Please make sure the following contents are in the MS916 gift box. If something is missing or dam

- 73 - 5.11 MSI 5.11.1 MSI To enable or disable MSI, scan the appropriate bar code below. 5.11.2 Set Lengths for MSI The length of a code refe

- 74 - Two Discrete Lengths - Select this option to decode only those codes containing two selected lengths. For example, select MSI Plessey Two Dis

- 75 - 5.11.3 MSI Check Digits These check digits at the end of the bar code verify the integrity of the data. At least one check digit is always re

- 76 - 5.11.5 MSI Check Digit Algorithm When the Two MSI check digits option is selected, an additional verification is required to ensure integrity

- 77 - 5.12.2 GS1 DataBar Limited To enable or disable GS1 DataBar Limited, scan the appropriate bar code below. 5.12.3 GS1 DataBar Expanded To

- 78 - parameter to transmit the system character and country code applies to converted bar codes. Note that neither the system character nor the che

- 79 - 5.14 Linear Code Type Security Level The MS916 offers four levels of decode security for linear code types (e.g. Code 39, Interleaved

- 80 - Linear Security Level 2 All code types must be successfully read twice before being decoded. Linear Security Level 3 Code types other tha

- 81 - 5.15 Bi-directional Redundancy This parameter is only valid when a Linear Code Type Security Level is enabled (please refer to 5.14 Linear Co

- 82 - Appendix A Appendix A: Miscellaneous Code Information AIM Code Identifiers Each AIM Code Identifier contains the three-character string ]cm

- 2 - Optional accessories 1-Slot Charging cradle 5-Slot Charging cradle USB Adapter NOTE: 1. The scanner’s default power off time is 5 minutes

- 83 - The modifier character is the sum of the applicable option values based on the following table. Table A-2 Modifier Characters Code Type Opt

- 84 - Code Type Option Value Option Codabar 0 No check digit processing. 1 Reader has checked check digit. Example: A Codabar bar

- 85 - According to AIM standards, a UPC with supplemental bar code is transmitted in the following format: ]E0 (UPC chars) (terminator) ]E2 (supplem

- 86 - Appendix B Appendix B: Numeric Bar Codes For parameters requiring specific numeric values, scan the appropriately numbered bar code(s).